Compatible models: Suzuki JB64W/74W (Jimny/Jimny Sierra) 2018/7-Automatic vehicles
Enjoy the ultimate operability and functional beauty with a special design for Suzuki JB64W, JB74W Jimny automatic vehicles.
A set of accelerator + brake for automatic vehicles + footrest (with back plate and base). *Note: When installing this set, two holes (Φ4.5) must be drilled in the original brake pedal, but no other processing such as drilling is required. )
The ultimate left-foot braking is achieved by extending the AT brake 48 mm to the left and raising the footrest to the appropriate height (approximately 35.5 mm up). By placing the heel of the left foot on the footrest and controlling the AT brake with the toe, time lag is reduced, subtle control is achieved, and misstepping is prevented. (Since two-pedal cars do not require clutch operation, there are advantages to braking with the left foot in competition cars, and this has become mainstream. *We do not intend to encourage braking with the left foot, and we do not recommend it to anyone who has any concerns at all.)
Accelerator: Made of 3mm thick aluminum, it has the same curvature (R270) as the original accelerator so that it can be easily controlled by sliding it slightly against the sole of the shoe, and is left as is. (Dimensions 42 x 124 mm) *No processing such as drilling is required on the vehicle for installation.
AT brake: Made of 3mm thick aluminum with the same curvature (R80) as the original brake, it is larger overall than the original, but has been extended 48 mm to the left specifically for left-foot braking. (Dimensions 62 x 132 mm) *Note: The AT brake requires two 4.5 mm holes to be drilled in the original pedal.
Footrest: Made of strong aluminum casting, it is 33mm high, with the footrest base being 2.5mm thick and the back plate being 1.5mm thick, making it 37mm higher than the original. The surface has been shot blasted to prevent slipping. (Dimensions 154 x 33 x 44mm) *No drilling or other processing is required on the vehicle for installation.
YouTube Motagare https://www.youtube.com/watch?v=rBy7zFDDspM&t=362s
Minkara https://minkara.carview.co.jp/partsreview/?bi=7&ci=93&mk=5616&direct=parts
Enjoy the ultimate operability and functional beauty with a special design for Suzuki JB64W, JB74W Jimny automatic vehicles.
A set of accelerator + brake for automatic vehicles + footrest (with back plate and base). *Note: When installing this set, two holes (Φ4.5) must be drilled in the original brake pedal, but no other processing such as drilling is required. )
The ultimate left-foot braking is achieved by extending the AT brake 48 mm to the left and raising the footrest to the appropriate height (approximately 35.5 mm up). By placing the heel of the left foot on the footrest and controlling the AT brake with the toe, time lag is reduced, subtle control is achieved, and misstepping is prevented. (Since two-pedal cars do not require clutch operation, there are advantages to braking with the left foot in competition cars, and this has become mainstream. *We do not intend to encourage braking with the left foot, and we do not recommend it to anyone who has any concerns at all.)
Accelerator: Made of 3mm thick aluminum, it has the same curvature (R270) as the original accelerator so that it can be easily controlled by sliding it slightly against the sole of the shoe, and is left as is. (Dimensions 42 x 124 mm) *No processing such as drilling is required on the vehicle for installation.
AT brake: Made of 3mm thick aluminum with the same curvature (R80) as the original brake, it is larger overall than the original, but has been extended 48 mm to the left specifically for left-foot braking. (Dimensions 62 x 132 mm) *Note: The AT brake requires two 4.5 mm holes to be drilled in the original pedal.
Footrest: Made of strong aluminum casting, it is 33mm high, with the footrest base being 2.5mm thick and the back plate being 1.5mm thick, making it 37mm higher than the original. The surface has been shot blasted to prevent slipping. (Dimensions 154 x 33 x 44mm) *No drilling or other processing is required on the vehicle for installation.
YouTube Motagare https://www.youtube.com/watch?v=rBy7zFDDspM&t=362s
Minkara https://minkara.carview.co.jp/partsreview/?bi=7&ci=93&mk=5616&direct=parts